Mitel 430 System Manual page 11

Use of third party software
MiVoice Office 400 products comprise, or are partially based on, third-party software
products. The licence information for these third-party products is listed in the user's
guide of the MiVoice Office 400 product in question.
Exclusion of Liability
(Not valid for Australia. See the chapter "Limited Warranty (Australia only)", page 15.)
All parts and components of the MiVoice Office 400 communication solution are manu-
factured in accordance with ISO 9001 quality guidelines. The relevant user information
has been compiled with the utmost care. The functions of the MiVoice Office 400 prod-
ucts have been tested and approved after comprehensive conformity tests. Nonethe-
less errors cannot be entirely excluded. The manufacturers shall not be liable for any
direct or indirect damage that may be caused by incorrect handling, improper use, or
any other faulty behaviour. Potential areas of particular risk are signalled in the appro-
priate sections of the user information. Liability for loss of profit shall be excluded in
any case.
Environment
MiVoice Office 400 products are delivered in recycled, chlorine-free corrugated card-
board packaging. The parts are also wrapped inside a protective fleece made of poly-
ethylene foam fleece or polyethylene film for added protection during shipping. The
packaging is to be disposed of in accordance with the guidelines stipulated under cur-
rent legislation.
MiVoice Office 400 products contain plastics based on a pure ABS, sheet
steel with an aluminium-zinc or zinc finish, and epoxy resin-based PCBs.
These materials are to be disposed of in accordance with the guidelines stip-
ulated under current legislation.
MiVoice Office 400 products are disassembled exclusively using detachable screwed
connections.
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Product and Safety Information
11