Mitel 430 System Manual page 43

Hide thumbs Also See for 430:
Table of Contents

Advertisement

2) Licence required
3) Can be used without licence subject to the following restrictions: Voice memory capacity approx. 20 minutes,
no e-mail notification in the event of new voice messages, no forwarding of voice messages, no call record-
ing, restricted voice mail menu by remote retrieval.
Selectable functions of the mainboard DSP
The DSP on the mainboard provides selectable functions. A description of the individ-
ual functions can be found as of page 45.
The functions are determined in the
possible combinations are listed, with the maximum number of channels. For this the
DSP chip on the mainboard has to be loaded with different firmware. Additional func-
tions require the use of one or more DSP modules. Some of these functions are sub-
ject to a licence.
Tab. 16
Selectable functions of the mainboard DSP
1)
DECT
VoIP
4
2
2
3
1) Licences required (see also "Licences", page 62)
2) Of relevance only to certain countries such as Brazil
Notes
– To be able to configure VoIP channels on the mainboard's DSP, make sure that in the
resources
The configured VoIP mode is valid for all the DSP chips of a node. The following also applies
to this mode:
- Two G.711 VoIP channels per system can be used without a licence.
- The G.711 VoIP channels of the mainboard can be combined with G.711 VoIP channels of
DSP modules.
– If voice mail channels are configured and licensed, the two G.711 basic voice mail channels
that can be used without a licence are redundant (see Tab. 15).
– Voice mail channels can only be configured on one DSP chip per node.
– The
Modem
be configured on the mainboard's DSP.
– The system has to be restarted for the configuration changes of the DSP to take effect.
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Media resources
1)
1)
Audio
GSM
2
8
2
4
8
4
(
=ym) view the
VoIP mode
function is used for remote maintenance via an analogue modem and can only
Expansion Stages and System Capacity
(
2)
CAS
Modem
Remarks
Standard configuration
30
30
G.711 VoIP channels only, two of them can
be used licence--free.
1
parameter is set to G.711.
=ym) view. In Tab. 16 all the
Media
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

415Mivoice office 400

Table of Contents