Licences; Eim Card - Mitel 430 System Manual

Operation and Maintenance
6. 3. 2. 1

Licences

To expand a system already in operation or to re-order a licence for a new system, pro-
ceed as follows:
1. Order the licences you want from your authorised dealer and specify the EID num-
ber, which serves to identify the communication server.
2. The new licence code can be obtained either from your authorized dealer or via
Mitel Connect https://connect.mitel.com
3. Enter the licence code in the
tion server. The licence code is stored on the EIM card.
4. The newly licensed features are enabled. It is not necessary to restart the communi-
cation server (exception: AIN licences).
The data stored on the EIM card is not deleted by a first start of the PBX, and remains
available.
See also:
"Licences", page 62
6. 3. 2. 2

EIM card

The EIM card must be replaced in the following cases:
• A licence is transferred to another communication server
• The mainboard is defective
• The EIM card is defective
A licence is transferred to another system of the same type
A licence can only be transferred to a communication server of the same type. To do so
you need to replace the EIM card with the licence information. For the procedure for
switching an EIM card see page 194.
The mainboard is defective
If you need to replace a defective mainboard, transfer the EIM card from the defective
mainboard onto the new one. For instructions on how to replace the mainboard, see
page 195.
The EIM card is defective
In the unlikely event of a defective EIM card, contact your authorized dealer to discuss
the procedure.
For the procedure for switching an EIM card see page 194.
190
using the EID (partner login required).
Licensing ( =q9) view and save it in the communica-
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016