Installation
Fig. 66
Audio interface
Tab. 72
Technical data of the audio interface
Input impedance
Input level
Input circuit
Output resistance audio source
Installation cable
Socket
Circuit type
4. 7. 7
Ethernet interfaces
The Mitel 415/430 communication servers have a 10/100BaseT 2-port LAN switch.
The Ethernet interfaces are permanently routed to the front panel and labelled accord-
ingly. The RJ45 sockets are highlighted in colour in the figure below.
Fig. 67
Connection possibilities for Ethernet interfaces
Note
Circuit type as per EN/IEC 60950: SELV
144
approx. 15 kΩ
0.1...5 V (configurable in 8 levels)
asymmetrical
< 1 kΩ
NF cable screened (required for low levels)
3.5 mm stereo jack
as per EN/IEC 60950: SELV
syd-0580/1.2 – R4.1 – 08.2016
Mitel 415/430 as of R4.1