Update Software; System Software - Mitel 430 System Manual

6. 2

Update Software

6. 2. 1

System software

The communication server software is normally updated with WebAdmin. In excep-
tional cases (e.g. during downgrade), an Emergency Upload via System Search is re-
quired (see also page 186).
The firmware for MiVoice 5300/MiVoice 5300 IP, Mitel 600 DECT phones, DECT
phone Office 135/135pro, DECT radio units SB-4+/SB-8/SB-8ANT and WebAdmin is
also available in the system software.
Tip
The communication server software version can be displayed as follows on
MiVoice 5300/MiVoice 5300 IP phones:
1. Access the configuration menu Settings.
2. Long-click on the * key
Information can be retrieved on /Mitel 6700 SIP / 6800 SIP SIP phones as well as on
/Mitel 600 DECT DECT phones via the menu.
Depending on the phone, additional information is displayed.
Providing the system software and licence code
The new system software and the relevant licence code are provided by your sales
dealer. In most cases you will download the software from an internet site specified by
your sales partner. You will also receive a voucher. With this you can generate the new
licence code through the Mitel Connect internet portal
transmit it to your communication system. You need a login to access Mitel Connect
(user name and password).
Load new system software with WebAdmin
New system software can conveniently and safely be loaded on the communication
server file system in the WebAdmin
activation point of the new software is selectable. (Exception: The activation time on
the satellites AIN always depends on the master's demand).
In newly delivered systems it is possible to directly load new system software after
choosing the sales channel.
Notes:
– Most times a new licence code is also required for new system software. You can also install
and start up the new software without specifying the licence code. However, once you have
started to use the software you will need to enter the licence code within 4 hours; otherwise
the communication server will switch over to the restricted operating mode. In this mode,
only the basic functions of the communication server are available.
– Depending on communication server type, the upload operation (especially decompressing
the software package) may take some time.
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
https://connect.mitel.com
Maintenance / System software
Operation and Maintenance
( =m7) view. The
and
185