Safety Information - Mitel 430 System Manual

Product and Safety Information
1. 3

Safety Information

Reference to hazards
Hazard warnings are affixed whenever there is a risk that improper handling may put
people at risk or cause damage to the MiVoice Office 400 product. Please take note of
these warnings and follow them at all times. Please also take note in particular of haz-
ard warnings contained in the user information.
Operating safety
MiVoice Office 400 communication servers are operated on 115 or 230 VAC mains
power. Communication servers and all their components (e.g. telephones) will not op-
erate when mains power fails. Interruptions in the power supply will cause the entire
system to restart. A UPS system has to be connected up-circuit to ensure an uninter-
ruptible power supply. Up to a specific performance limit a Mitel 470 communication
server can also be powered redundantly using an auxiliary power supply. For more in-
formation please refer to your communication server's system manual.
When the communication server is started for the first time, all the configuration data is
reset. You are advised to backup your configuration data on a regular basis as well as
before and after any changes.
Installation and operating instructions
Before you begin with the installation of the MiVoice Office 400 communication server:
• Check that the delivery is complete and undamaged. Notify your supplier immedi-
ately of any defects; do not install or put into operation any components that may be
faulty.
• Check that you have all the relevant user documents at your disposal.
• During the installation follow the installation instructions for your MiVoice Office 400
product and observe to the letter the safety warnings they contain.
Any servicing, expansion or repair work is to be carried out only by technical personnel
with the appropriate qualifications.
12
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016