Page 2
TO ANSWER AN INCOMING CALL Lift handset of ringing telephone Press flashing line button TO PLACE AN OUTGOING CALL Dial outside access code [9] Dial number you wish to call TO PLACE AN INTERNAL CALL Dial extension number TO PLACE A CALL ON HOLD With a call on the line, press HOLD To reconnect with caller: Press the flashing line button...
Page 3
TO TRANSFER A CALL With a call on the line, press Trans/Conf Dial destination extension number Announce call (if desired) Press Release me to transfer call Press Back to held to cancel TO PLACE YOUR PHONE IN DO-NOT-DISTURB Press Do Not Disturb feature key (The line appearance for the key turns on) TO CANCEL Press Do Not Disturb feature key...
TO PROGRAM SPEED DIAL Press SUPERKEY Press More Press Feature Key Press Speed Call Select PERSONAL KEY Dial [9] and the telephone number Dial extension number Press Save TO FORWARD YOUR TELEPHONE Without picking up the handset, press SUPERKEY Press More Press Forwarding Follow screen prompts: Busy...
How to Activate Your New Mailbox At your own phone dial the Voicemail extension number or press Vmail: Your answer to the questions will be for YES or for NO The system will ask you to record or enter the following: •...
Page 6
Repartee Short Cuts Check New Messages While Message is playing After Message has played 3 Skip to end of message 4 Reply 4 Slower playback 5 Check next message 5 Soft/loud 6 Delete 6 Faster playback 7 Archive 7 Back up (by 4 seconds) 8 Timestamp 8 Pause 9 Redirect...
Need help?
Do you have a question about the Superset 430 and is the answer not in the manual?
Questions and answers