Mitel 430 System Manual page 2

NOTICE
The information contained in this document is believed to be accurate in all respects
but is not warranted by Mitel Networks Corporation.
The information is subject to change without notice and should not be construed in
any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its
affiliates and subsidiaries assume no responsibility for any errors or omissions in this
document. Revisions of this document or new editions of it may be issued to incor-
porate such changes.
No part of this document can be reproduced or transmitted in any form or by any
means - electronic or mechanical - for any purpose without written permission from
Mitel Networks Corporation.
TRADEMARKS
The trademarks, service marks, logos and graphics (collectively "Trademarks")
appearing on Mitel's Internet sites or in its publications are registered and unregistered
trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively
"Mitel") or others. Use of the Trademarks is prohibited without the express consent
from Mitel. Please contact our legal department for additional information:
legal@mitel.com.
For a list of the worldwide Mitel Networks Corporation registered trademarks, please
refer to the website: http://www.mitel.com/trademarks.
PATENT NOTE ON POWER OVER ETHERNET
Mitel's Power Over Ethernet (PoE) Powered Device (PD) products are covered by one
or more of the U.S. patents (and any foreign patent counterparts thereto) identified at
Mitel's website: www.mitel.com/patents.
For more information on the PD patents that are licensed, please refer to .
www.cmspatents.com.
Mitel 415/430 as of R4.1
syd-0580/1.2 – 08.2016
®, ™ Trademark of Mitel Networks Corporation
© Copyright 2016 Mitel Networks Corporation
All rights reserved
2