Configuring - Mitel 430 System Manual

5. 5

Configuring

The configuration steps are based on the information determined during the planning
and, where applicable, the installation.
Whenever possible, use the planning and ordering software Mitel CPQ, to set up your
communication system. Mitel CPQ can be operated online after logging in at
Mitel Connect https://connect.mitel.com
hardware – it also lists the required licences for the planned operation.
See also:
If you are setting up an MiVoice Office 400 communication system for the first time, we recom-
mend to you the Getting-started package (see "First steps...", page 37).
Setup wizard
The WebAdmin setup wizard takes you step by step through the setup of a basic con-
figuration and is suitable for initial communication server setup. The setup wizard is au-
tomatically called up when a new communication server is installed. Logging on as ad-
ministrator in WebAdmin (expert or default mode) allows you to also start the setup
wizard directly from the WebAdmin navigation tree.
The setup wizard comprises the following steps:
1. Activating licences
2. Setting up the IP addressing
3. Configuring media resources
4. Setting up the numbering plan
5. Setting up SIP providers
6. Setting up users, terminals and DDIs
7. Setting up the auto attendant
For each step you can display a help page or see it in the lower part of the window
where it is already displayed. You can skip individual steps of the setup wizard or exit
the setup wizard at any time in order to return to the WebAdmin start page.
Configuration assistant
The configuration assistant goes further than the setup wizard and helps you to config-
ure a communication system in sequence, from scratch. Logging on as administrator in
WebAdmin (expert or default mode) allows you to display the configuration assistant
on the WebAdmin start page.
The configuration assistant comprises the following steps:
1. Setting up the IP addressing
2. Regulating access control
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
. Mitel CPQ not only calculates the required
Configuration
175