Communication Server - Mitel 430 System Manual

Annex
– Voice path with A/D and D/A conversion (standard PCM, A-law)
– Transmission as per ES 201 168 (level country-specific)
– Constant-current loop supply approx. 25 mA (with loop resistance ≤ 1000 Ω)
– Receive pulse or DTMF dialling
– CLIP display on all analogue terminal interfaces (Mitel 415/430 only on 2 ana-
logue terminals simultaneously).
– Ringing supply 40...43 V 50 Hz at load 4kΩ; no DC voltage overlay (country-spe-
cific versions also with 25 Hz)
– No control key detection
– No charge signalling pulses
• For more technical details and cable requirements see "Multifunctional FXS inter-
faces", page 127.
7. 4. 3

Communication server

Tab. 117 Dimensions and weights
Height
Width
Depth
Weight (excl. mains cord, interfaces cards, modules and
packaging)
Tab. 118 Electrical isolation of interfaces
Interface
Analogue network interfaces
Digital network interfaces BRI
Control input on ODAB
Freely connectable relay contacts on ODAB
Door intercom interface on ODAB
Control input on FXS interface
Control output on FXS interface
Audio input
Tab. 119 Ambient conditions
Condition
Ambient temperature
Relative air humidity
248
Mitel 415/430 for wall
mounting
65 mm
360 mm
294mm
2.4 kg
Mitel 415/430
0.2 kV Operating isolation
Operating isolation
no isolation, but input impedance > 8 kΩ
0.2 kV
0.2 kV
no isolation
no isolation
no isolation
Mitel 415/430
5 °C to 45 °C
30 % to 80 %, non-condensating
Mitel 415/430 in rack
mounting
65 mm
483 mm
294mm
2.5 kg
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016