Terminal Interfaces - Mitel 430 System Manual

Installation
In a direct connection the RJ45 connector is connected directly to the trunk cable using
a crimp clip.
With an indirection connection you need to observe the cable requirements.
Note
Circuit type as per EN/IEC 60950: TNV-3
Connection
Assignment of the RJ45 sockets on the front panel:
Tab. 48 Connection FXO network interface
Public analogue network
a
b
Cable Requirements
Tab. 49 Cable requirements for FXO network interface
Core pairs × cores
Stranded
Wire diameter, core
Screening
Resistance
4. 7. 3

Terminal interfaces

The number of available terminal interfaces on the mainboard can be increased by fit-
ting interface cards.
The RJ45 connector assignment is the same for interfaces of the mainboard and termi-
nal cards.
114
Communication server
FXO signal Pin
– 1
– 2
– 3
a 4
b 5
– 6
– 7
– 8
1 × 2
not required
0.4 ... 0.8 mm
not required
max. 2 × 250 Ω
Socket
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016