Mitel 430 System Manual page 197

Registering a cordless phone on the system
1. Prepare the cordless phone for registration (see the cordless phone's User's
Guide).
2. Prepare system for registration. In WebAdmin in the edit view of the cordless phone,
click Register.
Note:
With some phone types, the user of the cordless phone may have to identify himself to the sys-
tem using an authentication code (AC). This authentication code is issued after the
button is clicked.
Replacing a cordless phone (a phone with microSD card)
The special microSD card is suitable for replacement with wireless DECT phones
Mitel 620/622 DECT, Mitel 630/632 DECT and Mitel 650 DECT. The card stores the
cordless phone's registration data on the communication server and the most impor-
tant local settings. This guarantees that in case of device defect - by taking the card
along - the operation on a replacement device can be continued within a short period
and without re-registering.
Each card (like each cordless phone) has its own, globally known unique serial number
for DECT devices (IPEI: International Portable Equipment Identity), used for the regis-
tration process on DECT communication systems. In an operation with the card, the
data stored on the card is always used.
Notes:
– The microSD card can only be used as from Device hardware 2 (concerns Mitel 620 DECT,
Mitel 630 DECT).
– Use the card only after reading this detailed description of the card functions. Failing to
observe these recommendations may cancel the registration of operational devices.
– All registration and device data on the card is encrypted and protected against copying.
– Do not use the card with other devices (e.g. camera) to avoid reformatting the card mistak-
enly and to have enough storage space.
– The card can no longer be used with the cordless phones after being erased or formatted.
– Commercially available microSD cards cannot be used (except to copy local settings, see
page 199).
1)Supported as of R2.1
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Operation and Maintenance
Register
1)
197