Configuring The Audio Mode; Headset - Mitel MiVoice 6920 User Manual

Audio Mode Option
Headset/Speaker

Configuring the Audio Mode

1. Press
2. Enter your voicemail password, and press the Enter softkey.
The User Settings menu opens.
3. Navigate to the Audio > Audio Mode option and press the select button or press the Select
softkey.
4. Use the up or down navigation key to scroll through and highlight the preferred audio mode.
• Speaker (default)
•

Headset

• Speaker/Headset
• Headset/Speaker
5. Press the Save softkey to save your changes.
Headset
The Headset option allows you to set the volume level for the headset microphone and also allows
you to enable/disable DHSG.
DHSG is a standard for telecommunication headsets. The 6920 IP Phones support the use of a
DHSG headset.
Use of a non-verified DHSG headset solution is at the customer's own discretion and the customer
should be aware that some DHSG headsets require an optional cable in order to be electrically
DHSG compliant. Mitel is not responsible for any damage to the IP phone or headset that may result
from the use of non-verified headsets, or from incorrectly connecting headsets or cables.
Description
Incoming calls are sent to the headset first when
pressing the hardkey again, you can switch back and forth between the
headset and the handsfree speakerphone. At any time, lifting the handset
switches back to the handset from either the headset or the handsfree
speakerphone.
.
Configuring the Audio Mode
is pressed. By
41