Safety Information - Mitel MIVOICE OFFICE 400 User Manual

Safety information

Failure to observe this information can be hazardous and infringe existing
laws.
Connections
Always plug the phone cable connectors into the appropriate sockets. Do not
modify the connections in any way.
Power supply
Your phone can be supplied with power in various ways. Pay attention to the
information given by the system administrator.
Note:
The device will be inoperable when mains power of the communication system
fails.
Metal objects
Telephone receivers produce magnetic fields that can attract small metallic
objects such as pins and staples. To avoid injury, do not place the handset
where such objects can be picked up.
Maintenance
Make sure all installation and repair work is carried out by a specially qualified
technician.
Always use a soft, moistened, or antistatic cloth to clean your device. Do not use
chemicals or other chemical products.
Cost control and Data protection
1
You should protect your phone with a PIN so that no-one can make phone calls
5 20
at your expense. A code will also protect your personal settings.
Ambient conditions
Do not operate the device outside the temperature range of +5 °C to approx.
+40 °C. Avoid direct sunlight and other sources of heat. Protect your device
against the wet, excessive dust, corrosive liquids and steam.
Do not expose your device to electromagnetic fields (electric motors, household
appliances). The speech quality could be affected.
Disposal
Be sure to dispose of your device, batteries and its packaging in an environmen-
tally compatible way. Electrical equipment does not belong in domestic waste.
Deposit it at a return centre.
Accessories
Use original accessories or specifically approved accessories only. The use of
other accessories may decrease performance or pose a risk to your health or
safety.
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.0 – R4.0 – 06.2015
Welcome...
3