System Unit Cover; Rack System Instructions - Oracle SNMA-2 Safety And Compliance Manual

System Unit Cover

You must remove the cover of your Oracle computer system unit to add cards, memory, or
internal storage devices. Be sure to replace the cover before powering on your computer system.
Do not operate Oracle products without the cover in place. Failure to take this
Caution -
precaution may result in personal injury and system damage.

Rack System Instructions

The following or similar rack-mount instructions are included with the installation instructions:
Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the
■
operating ambient temperature of the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the equipment in an environment
compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
Reduced Air Flow – Installation of the equipment in a rack should be such that the amount
■
of air flow required for safe operation of the equipment is not compromised.
Mechanical Loading – Mounting of the equipment in the rack should be such that a
■
hazardous condition is not achieved due to uneven mechanical loading.
Circuit Overloading – Consideration should be given to the connection of the equipment
■
to the supply circuit and the effect that overloading of the circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of equipment nameplate ratings
should be used when addressing this concern.
Reliable Earthing – Reliable earthing of rack-mounted equipment should be maintained.
■
Particular attention should be given to supply connections other than direct connections to
the branch circuit (for example, use of power strips).
Slide/rail mounted equipment must not be used as a shelf or workspace.
Caution -
Safety Precautions
Safety Agency Compliance Statements 35