Table of Contents
Advertisement
For information about initializing TPM using the Oracle ILOM interface to enable failover,
see
Securing Systems and Attached Devices in Oracle Solaris
b.
Restore the TPM data and keys that were backed up to the new SP you
install.
For information about migrating or restoring TPM data and keys, see
and Attached Devices in Oracle Solaris
Verify the SPM.
11.
See
"Verify the SPM" on page
12.
Verify that the SPM date is correct.
-> show /SP/clock
/SP/clock
Properties:
datetime = Tue Sep 07 08:09:59 2013
timezone = GMT (GMT)
uptime = 0 days, 00:01:18
usentpserver = disabled
->
a.
Set the datetime property, if necessary.
-> set /SP/clock datetime=MMDDhhmmYYYY
b.
Set the timezone property, if necessary.
-> set /SP/clock timezone=3-to-4-characters
where the timezone value equals a three- or four-character timezone abbreviation, such as
EST.
Related Information
Oracle ILOM documentation
■
"Remove the SPM" on page 132
■
"Verify the SPM" on page 137
■
Verify the SPM
Verify that the SP Status LED is illuminated green.
1.
11.3.
137.
Verify the SPM
11.3.
Securing Systems
Servicing the SPM
137
Advertisement
Table of Contents
