13.3
Programming rotary axes
13.3
13.3.1
General information
Note
For general information on programming, please refer to:
References:
/PG/ Programming Manual Fundamentals
MD30310
Axis-specific machine data
MD30310 ROT_IS_MODULO (modulo conversion for rotary axis)
is used to define whether the rotary axis behaves as a linear axis during programming and
positioning or whether rotary-axis special features are taken into account.
These features and any differences (mainly with respect to absolute programming) are
explained on the following pages.
13.3.2
Rotary axis with active modulo conversion (continuously-turning rotary axis)
Activate modulo conversion
→ Set MD30310 $MA_ROT_IS_MODULO = 1.
Note
With modulo axes, it is advisable to set the position display to modulo 360º (set MD30320
$MA_DISPLAY_IS_MODULO = 1).
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
R2: Rotary axes
13.3 Programming rotary axes
857