Dynamiclom Modules; Installing A Dynamiclom Module; Preliminary Steps; Removing The Dummy Cover - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

9.4

DynamicLoM modules

9.4.1

Installing a DynamicLoM module

Upgrade and Repair Unit
(URU)
Tool: – Phillips PH1 / (+) No. 1 screw driver
– hexagon screw driver 5mm
9.4.1.1

Preliminary steps

"Disabling SVOM boot watchdog functionality" on page 72
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
Ê Remove riser module 2 and riser module 3 as described in section
"Removing a riser module" on page
9.4.1.2

Removing the dummy cover

Figure 112: Removing the dummy cover
Ê Grip the handle and pull out the dummy cover.
RX2530 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
62.
179