Digital Input Settings; Logic State; Instrument Action - Thermo Scientific Partisol 2000i Instruction Manual

Firmware Screen Descriptions
Service Menu

Instrument Action

9-80 Partisol 2000i and Partisol 2000i-D Instruction Manual

Logic State

The Logic State screen is used to change the I/O relay to either normally
open or normally closed. The default state is open, which indicates that a
relay connected between the digital input pin and ground is normally open
and closes to trigger the digital input action. If nothing is connected to the
digital input pin, the state should be left at open to prevent the action from
being triggered.
In the Main Menu, choose Service > External I/O > Digital Input
●
Settings > Select relay (1-16) > Press
state open or closed.
The Instrument Action screen allows the user to select the instrument state
that is tied to the selected digital input.
In the Main Menu, choose Service > External I/O > Digital Input
●
Settings > Select relay (1-16) > Instrument Action.

DIGITAL INPUT SETTINGS:

>1 NOP
2 NOP
3 NOP TRIGGER SAMPLE
4 NOP AOUTS TO ZERO
5 NOP AOUTS TO FS
CTRST SSET INSTS
16 NOP
DIGITAL INPUT SETUP:
>LOGIC STATE
INSTRUMENT ACTION
CTRST SSET INSTS
CHOOSE ACTION:
>NONE
STOP
START
TRIGGER SAMPLE
AOUTS TO ZERO
CTRST SSET INSTS
AOUTS TO FS
EXT ALARM 1
EXT ALARM 2
EXT ALARM 3
STOP
START

STAT
EXT ALARM 1
to toggle and set the logic
OPEN
STAT
<--

STAT
Thermo Fisher Scientific