Streaming Data Interval; Choose Stream Data; Concentrations - Thermo Scientific 42i Instruction Manual

Choose Stream Data

Concentrations

Thermo Fisher Scientific

STREAMING DATA INTERVAL:

CURRENTLY:
SET TO:
RANGE AVG
Note Add Labels, Prepend Timestamp, and Add Flags are toggle items that
change between yes or no when selected.
The Choose Stream Data screen displays a list of the types of data that can
be sent via streaming data. Choices are Concentrations, Other
Measurements, and Analog Inputs (if the I/O expansion board is installed).
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > Item 1–8.
CHOOSE STREAM DATA:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG
The Concentrations screen allows the user to assign one of the
concentrations to the selected streaming data item. The currently selected
item is shown by "<--" after it. Once an item is selected, pressing
will save the selected streaming data item. In dual or auto range mode,
"HI" or "LO" is displayed to indicate high or low range concentrations.
Rang (NO ) is visible only in auto range mode.
x
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > select Item > Concentrations.
CONCENTRATIONS:
>NONE
NO
NO2
NOx
RANGE (NOX)
RANGE AVG
10 SEC
20 SEC ?

CHANGE VALUE

SAVE VALUE
DIAGS ALARM
▲
DIAGS ALARM
<--
DIAGS ALARM
Operation
Instrument Controls Menu
Model 42i Instruction Manual 3-39