Streaming Data Interval - Thermo Scientific 48i Instruction Manual

Operation
Instrument Controls Menu

Streaming Data Interval

Prepend Timestamp
3-40 Model 48i Instruction Manual
The Streaming Data Interval screen is used to adjust how frequently a new
record will be generated. The following interval times are available: 1, 2, 5,
10, 20, 30, 60, 90, 120, 180, 240, and 300 seconds.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > Interval.
Add Labels The Add Labels screen allows the operator to toggle between YES and NO.
If set to YES, then each data point in the streaming record will have a label
attached.
 In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > Add Labels.
The Prepend Time Stamp screen allows the operator to toggle between
YES and NO. If set to YES, then each streaming data record will start with
a time and date stamp indicating when that record was generated.
 In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > Prepend Timestamp.
Add Flags
The Add Flags screen allows the operator to toggle between YES and NO.
If set to YES, then each streaming data record will include a set of flags that
indicate various diagnostic or alarm conditions.
 In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > Add Flags.
STREAMING DATA CONFIG
>INTERVAL
ADD LABELS
PREPEND TIMESTAMP
ADD FLAGS
ITEM 1
RANGE AVG DIAGS ALARM
STREAMING DATA INTERVAL:
CURRENTLY:
SET TO:

CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
10 SEC
NO
YES
YES
CO 
10 SEC
20 SEC ?
Thermo Fisher Scientific