Displaying And Editing Plc Signals In The Status List - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
20.4
Displaying and editing PLC signals in the status list
PLC signals are displayed and can be changed in the "PLC Status List" window.
The following lists are shown
Inputs (IB)
Bit memories (MB)
Outputs (QB)
Variables (VB)
Data (DB)
Setting the address
You can go directly to the desired PLC address to monitor the signals.
Editing
You can edit the data.
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
20.4 Displaying and editing PLC signals in the status list
Examples
DB97.DBX2.5
Result: DB97.DBX2.6
$AA_IM[1]
Result: $AA_IM[2]
MB201
Result: MB200
/Channel/Parameter/R[u1,3]
Result: /Channel/Parameter/R[u1,2]
1.
Select the "Startup" operating area.
2.
Ladder add-on tool is opened.
3.
Press the "Status list" softkey.
The "Status List" window appears.
4.
Press the "Set address" softkey.
The "Set Address" window appears.
Edit PLC user program (828D only)
367
Advertisement
Table of Contents
