Information Of Windows Installation; Starting Expressbuilder - NEC Express5800 Series Installation Manual

Chapter 1 Installing Windows
1.

Information of Windows Installation

This section describes the points of using EXPRESSBUILDER/Starter Pack to install Windows operating
system.
Refer to the following for the installation of virtual OS.
If your virtualization infrastructure is Hyper-V:
Refer to the following web site for the Hyper-V setting and the installation procedure of the guest OS
and so on.
http://www.58support.nec.co.jp/global/download/w2016/hyper-v/hyper-v-ws2016.html
If your virtualization infrastructure is not Hyper-V:
Refer to the manual provided by virtualization infrastructure vendor to prepare the virtual environment.
Prepare a media or an ISO image of the OS to install.
1. Start the virtual machine from a media or an ISO image of the OS to install.
2. Follow the on-screen instruction to complete the OS installation.
3. Refer to the manual provided by virtualization infrastructure vendor to install the necessary
services and applications.
1.1

Starting EXPRESSBUILDER

Use EXPRESSBUILDER to reconfigure RAID arrays or re-install the OS.
For details, see Chapter 2 (3. Details of EXPRESSBUILDER) in Maintenance Guide.
Usage
Remove a CD/DVD and removable media from the server, restart the server and press <F10> key
(EXPRESSBUILDER) during POST.
Important
The product key on the Certificate of Authenticity (COA) label is necessary
information when authenticate the license.
Scrape off with a coin or the like lightly the scratch that covers a part of the
product key. When you scrape, be careful not to break the part that the
product key is printed on.
The label cannot be reissued if it is lost or stained. It is recommended to
write down the product key and keep it with other accessories.
Express5800/R110j-1 Installation Guide (Windows)
Information of Windows Installation
13