Table of Contents
Advertisement
Chapter 2 Preparations
1.13
Optical Disk Drive
Procedures for replacing the standard optical disk drive with the optional internal DVD SuperMULTI drive are
described below.
1.13.1
Replacing drives
Follow the procedure below to replace your drive with the optional internal DVD SuperMULTI drive.
1.
See Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
To remove the side cover and front bezel, see Chapter 2 (1.4 Removing the Side Cover and 1.5
Removing the Front Bezel).
3.
Remove the duct, If a device is installed in the 5.25-inch expansion bay (1), remove it so that you can
access the cable connected to the optical disk drive.
4.
Disconnect the SATA cable and DC power cable
from the optical disk drive.
5.
Push the stopper on the right side and remove the
optical disk drive.
6.
Remove the bracket from the optical disk drive.
Important
Do not install a drive manufactured by a third party.
Express5800/T110g-E User's Guide
1. Installing Internal Optional Devices
91
Advertisement
Table of Contents
