Section 1 Introduction And Specifications; Installation, Pneumatic And Electrical Connections, And Initial Configuration; Scope Of Manual; Instrument Description - Fisher FIELDVUEDVC6200f Instruction Manual

Instruction Manual
D103412X012

Section 1 Introduction and Specifications

Installation, Pneumatic and Electrical Connections,
and Initial Configuration
Refer to the DVC6200 Series Quick Start Guide (D103556X012) for DVC6200
installation, connection, and initial configuration information. If a copy of this quick
start guide is needed scan or click the QR code at the right, contact your
Automation Solutions sales

Scope of Manual

This instruction manual is a supplement to the quick start guide that ships with every instrument. This instruction
manual includes product specifications, supplementary installation information, reference materials, custom setup
information, maintenance procedures, and replacement part details for the DVC6200f digital valve controller.
Note
All references to the DVC6200f digital valve controller include the DVC6205f base unit unless otherwise indicated.
This manual describes device setup using a Field Communicator. For information on using Fisher ValveLink
with the instrument, refer to the appropriate user guide or help.
Do not install, operate, or maintain a DVC6200f digital valve controller without being fully trained and qualified in
valve, actuator, and accessory installation, operation, and maintenance. To avoid personal injury or property damage,
it is important to carefully read, understand, and follow all of the contents of this manual, including all safety cautions
and warnings. If you have any questions about these instructions, contact your Emerson Automation Solutions sales
office before proceeding.

Instrument Description

DVC6200f digital valve controllers for F
addition to the traditional function of converting a digital signal to a pneumatic output pressure, the DVC6200f digital
valve controller, using F
OUNDATION
process operation as well as process control. This can be done using a DeltaVt console, another F
system console, or with ValveLink software version 13 or later.
Using a compatible fieldbus configuration device, you can obtain information about the health of the instrument, the
actuator, and the valve. You can also obtain asset information about the actuator or valve manufacturer, model, and
serial number. You can set input and output configuration parameters and calibrate the instrument.
Using the F Fieldbus protocol, information from the instrument can be integrated into control systems.
OUNDATION
office, or visit our website at www.Fisher.com.
Fieldbus are communicating, microprocessor‐based instruments. In
OUNDATION
Fieldbus communications protocol, gives easy access to information critical to
DVC6200f Digital Valve Controller
Introduction and Specifications
Emerson
February 2017
Scan or click
to access
field support
™ software
Fieldbus
OUNDATION
5