DVC6200f Digital Valve Controller
DO Function Block
February 2017
Figure E‐26. Discrete Output Function Block Schematic
RCAS_IN_D
SP_D
CAS_IN_D
SHED MODE
Modes
The DO block supports the following modes:
D Manual (Man)—The block output OUT_D [9] value may be entered manually.
D Automatic (Auto)—The block algorithm uses the local set point SP_D [8]value to determine OUT_D [9].
D Cascade (Cas)—The block uses a set point supplied by another function block.
Note
The transducer block must be in Auto for the mode to go to AUTO, CAS or MAN.
D RemoteCascade (RCas)—The block uses a set point supplied by a host computer.
D Out of Service (OOS)—The block is not processed and the output is not transferred to I/O. The BLOCK_ERR [6]
attribute shows Out of service.
302
RCAS_OUT_D
PV_D
CONVERT AND
STATUS
CALCULATION
READBACK_D
IO_OPTS
MODE
SIMULATE_D
CHANNEL
TRANSDUCER
BLOCK FEEDBACK
BKCAL_OUT_D
OUT_D
TRANSDUCER
BLOCK
Instruction Manual
D103412X012