Instruction Manual
D103412X012
Section 6 Viewing Device Variables and
View Lists
View Lists allow the values of a set of parameters to be accessed at the same time. View lists are available for the
resource and transducer blocks, and the function blocks.
Resource Block—table 4‐4
Transducer Block—table 4‐13 and 4‐14
AO Function Block—table E‐3
PID Function Block—table E‐7
CSEL Function Block—table E‐10
IS Function Block—table E‐14
Note
Views Lists are used by hosts for efficient monitoring of multiple parameters. Normally you will not be aware of view list usage, as
they are hidden by the host software.
Resource Block
This section contains information on the DVC6200f digital valve controller resource block. The resource block defines
the physical resources of the device. The resource block also handles functionality that is common across multiple
blocks. The block has no linkable inputs or outputs.
Device Diagnostics
RB > Device Diagnostics
Field Communicator
Active FD Alerts indicate the field diagnostic alerts that are active in the device.
•Fail Active (FD_FAIL_ACTIVE [53])
•Check Active (FD_CHECK_ACTIVE [56])
•Offspec Active (FD_OFFSPEC_ACTIVE [54])
•Maintenance Active (FD_MAINT_ACTIVE [55])
DVC6200f Digital Valve Controller
Viewing Device Variables and Diagnostics
Diagnostics6-6-
OS Function Block—table E‐21
AI Function Block—table E‐27
MAI Function Block—table E‐31
DO Function Block—table E‐36
DI Function Block—table E‐42
February 2017
125