Fisher FIELDVUEDVC6200f Instruction Manual page 6

DVC6200f Digital Valve Controller
Introduction and Specifications
February 2017
Figure 1‐1 FIELDVUE DVC6200f Digital Valve
Controller Mounted on a Fisher Sliding‐Stem Valve
Actuator
W9643_fieldbus
DVC6200f digital valve controllers can be mounted on single or double‐acting sliding‐stem actuators, as shown in
figure 1‐1, or on rotary actuators. It can also be integrally mounted to Fisher 657/667 size 30i to 76i actuators or the
Fisher GX control valve and actuator system, as shown in figure 1‐2. The DVC6200f mounts on most Fisher and other
manufacturers' rotary and sliding‐stem actuators.
DVC6200f digital valve controllers are available with several selections of control and diagnostic capability. Control
selections include:
D Standard Control (SC)— Digital valve controllers with Standard Control have the AO, PID, CSEL, ISEL, OS, AI, MAI,
DO, and four DI function blocks in addition to the resource and transducer blocks.
D Fieldbus Control (FC)—Digital valve controllers with Fieldbus Control have the AO function block in addition to the
resource and transducer blocks.
D Fieldbus Logic (FL)—Digital valve controllers with Fieldbus Logic have the DO, and four DI function blocks, in
addition to the resource and transducer block.
The diagnostic capabilities include:
D Partial Stroke Test (PST)
D Performance Diagnostics (PD)
D Advanced Diagnostics (AD)
D Fieldbus Diagnostics (FD)
Partial Stroke Test, Performance, and Advanced Diagnostics are available with ValveLink software. They provide
visibility to instrument alerts. Fieldbus Diagnostics can be viewed with any host system.
6
Figure 1‐2. FIELDVUE DVC6200f Digital Valve
Controller Integrally Mounted to a Fisher GX Control
Valve and Actuator System
W9616_fieldbus
Instruction Manual
D103412X012