Edit - Vexta EMP400 Series Operating Manual

EDIT

Name Edit program
Valid mode Direct input
Syntax EDIT[, | ]n
n
Function A program can be edited from the line editor.
If the program number is not entered, a list of program numbers and the line numbers will be
displayed. The number of remaining lines will be displayed in a message.
Request 0>EDIT
SEQUENCE DIRECTORY:
Seq.0
Seq.3
Seq.6
Seq.9
Seq.12
Seq.15
Seq.18
Seq.21
Seq.24
Seq.27
Seq.30
∗
1000Steps free.
Parameter
Program number 0 to 31, 99
0Steps. Seq.1 0Steps.
0Steps. Seq.4 0Steps.
0Steps. Seq.7 0Steps.
0Steps. Seq.10 0Steps.
0Steps. Seq.13 0Steps.
0Steps. Seq.16 0Steps.
0Steps. Seq.19 0Steps.
0Steps. Seq.22 0Steps.
0Steps. Seq.25 0Steps.
0Steps. Seq.28 0Steps.
0Steps. Seq.31 0Steps.
8 Program command
Data range
Seq.2 0Steps.
Seq.5 0Steps.
Seq.8 0Steps.
Seq.11 0Steps.
Seq.14 0Steps.
Seq.17 0Steps.
Seq.20 0Steps.
Seq.23 0Steps.
Seq.26 0Steps.
Seq.29 0Steps.
Config 0Steps.
Default
8-19