Vexta EMP400 Series Operating Manual page 2

The product described in this manual has been designed and manufactured for use in general industrial
machinery, and must not be used for any other purpose. Use a DC power supply with reinforced
insulation provided on the primary and secondary sides as the power source for the controller and
input/output signals.
Oriental Motor Co., Ltd. is not responsible for any damage caused through failure to observe this
warning.
Duplicate copies of critically important data should be stored in a separate medium in case a
mishap should occur.
Oriental Motor shall not be liable for damage to or loss of data resulting from the use of this
product.
Unauthorized reproduction or copying of all or part of this instruction manual is prohibited.
If a new copy is required to replace an original manual that has been damaged or lost, please
contact your nearest branch or sales office.
This Operating Manual is subject to change without prior notice for the purpose of product
improvement or changes in specifications, or to improve its general content.
While we make every effort to offer accurate information in the manual, we welcome your input.
Should you find unclear descriptions, errors or omissions, please contact the nearest office. Contact
information may be found at the end of this operating manual.
is a trademark of Oriental Motor Co., Ltd., and is registered in Japan and other countries.
All other product names and company names are the trademarks or registered trademarks of their
respective companies. Any reference made in this Operating Manual to the names of products
manufactured by companies other than Oriental Motor is done so for reference purposes only and is
not intended to enforce or recommend the use thereof. Oriental Motor shall not be liable in anyway
whatsoever for the performance or use of products made by other companies.
ｃ
ORIENTAL MOTOR CO., LTD. 2001
Copyright
2