Writing A Program With A Text Editor - Vexta EMP400 Series Operating Manual

6 Writing and editing a program
When an error message appears
An error message is displayed if any invalid command or parameter is entered while the sequence
program is being created.
If an error message appears, see section 6.7, "List of messages associated with programs," for the
appropriate corrective action.
6.5

Writing a program with a text editor

A program may be written using a text editor on your PC.
The program should then be saved in text format for downloading to the controller via HyperTerminal's
transmission function.
The downloaded program will be saved in the controller memory.
The program saved in the controller may also be uploaded to a PC via HyperTerminal's transmission
function and saved in text format.
Controller
PC
Downloading
Uploading
6-10