Vexta EMP400 Series Operating Manual page 38

6 Writing and editing a program
5. Type in a name for the connection (e.g. EMP400), then select an icon and click "OK."
A window appears, asking you to enter information regarding the telephone number.
6. In a typical connection method you may select the communication port you have previously
verified as described in section 6.3.1, "Verifying the communication method," and click "OK."
A window appears in which to set properties.
Note
The connection method may vary, depending on the computer.
For details, see the operating manual for your computer.
7. Set properties as follows:
• Bits per second: 9600 bps
• Data bit: 8
• Parity: None
• Stop bit: 1
• Flow control: None
6-6