Entering The Sign; Entering A Numeric Value With A Decimal Point - Vexta EMP400 Series Operating Manual

9.2.4 Entering the sign

OP300 allows entering of + and - signs.
Signs can be entered as the leftmost digit. Move the blinking cursor to the left and press
choose the display corresponding to the sign.
Sign
When +
When -
No sign change

9.2.5 Entering a numeric value with a decimal point

When entering a value that includes a decimal point, such as the movement amount, the following
procedure must be taken. Up to seven digits after the decimal point can be entered. The total
number of digits that can be entered, including the digits after the decimal point, is 8.
1. Press to move the blinking cursor to the lowest
(rightmost) digit.
2. Confirm that the blinking is at the lowest and rightmost
digit, then press
A decimal point and the first digit after the decimal point
will be displayed, while the highest (leftmost) digit is
deleted.
Note
When digits after the decimal point are displayed, the
highest digit is deleted.
If you make an incorrect entry, press
original value.
3. Enter the numeric value using
To enter more than one digit after the decimal point,
move the blinking cursor to the lowest digit and press
. The next digit will be displayed while the highest
digit is deleted.
To delete the digits after the decimal point, move the
blinking cursor to the position where the sign is and
press . The lowest (rightmost) digit is deleted and
the highest digit will be displayed to the left end.
9
Display
Motor rotates in the CW direction
Motor rotates in the CCW direction
Rotational direction set in the program
.
to revert to the
and .
Controlling with the operational unit
Meaning
Highest digit is
deleted
Number of digits after
the decimal point increases
Highest digit is
added
or to
Displays the
decimal point
Press again
Press
Number of digits
after the decimal
point decreases
9-5