Pulse - Vexta EMP400 Series Operating Manual

PULSE

Name Set the pulse output mode
Valid mode Direct input/program
Syntax PULSE (1 | 2) [, | ] n
(1 | 2)
n
Function Sets the pulse output mode.
Set the mode to either 1-pulse mode (PULSE/DIR) or 2-pulse mode (CW/CCW).
Request 0>PULSE1
0: PULSE1 = 1
0>PULSE2
0: PULSE2 = 2
Parameter
Axis 1 (select axis 1), 2 (select axis 2)
* If this parameter is omitted, axis 1 will be
selected.
Setting for pulse 1 (1-pulse mode), 2 (2-pulse mode)
output mode
8 Program command
Data range Default
2
8-35