Uploading A Program - Vexta EMP400 Series Operating Manual

6 Writing and editing a program

6.5.3 Uploading a program

The program saved in the controller may be uploaded to a PC via HyperTerminal's transmission
function.
The uploaded program will then be saved to a specified file in text format.
Either one or all of the programs can be uploaded at once.
1. See section 6.3, "Starting and exiting HyperTerminal," to connect the controller with a PC and
start HyperTerminal.
2. Start a text editor.
3. Create and save a new text file.
Add the ".txt" extension to the text file name. Do not make any entry to the file.
4. Switch on the power to the controller.
The HyperTerminal screen will indicate that the controller has been started.
5. Type in the upload command "UPLD" and press the Enter key.
A message appears, prompting you to select a sequence program (Select upload Sequence No.
0-31, 99, ALL).
6-14