Monitor Mode - Vexta EMP400 Series Operating Manual

9 Controlling with the operational unit
9.3

Monitor mode

In monitor mode, the current position when the host controller is operating the motor will be displayed
in real time.
Displays the current position
Displays the sign
When the power of the operational unit is turned on, the unit automatically displays the current
position of axis 1 and illuminates the AX1 LED. If the movement-amount unit has been set with the
UNIT command, the display will be in movement units. If the value is negative, the space to the left
will display a minus sign.
In monitor mode, every time
displayed in turn, illuminating their respective LEDs.
If you press
displayed. To return to the current position display, press
9-6
LED for axis 1
MON
AX1
Switches between axes 1 and 2
or is pressed, the current positions for axis 1 and axis 2 are
or , the number of the program under execution and the line number will be
MON
AX1
Program number Line number
LED for axis 2
EDIT TEACH
AX2
or .
EDIT TEACH
AX2