Program Execution Via Command - Vexta EMP400 Series Operating Manual

7 7 7 7 7 Executing the program
7.4

Program execution via command

A program can be executed by inputting the RUN command to HyperTerminal on a PC.
1. See section 6.3, "Starting and exiting HyperTerminal," to connect the controller with a PC and
start HyperTerminal.
2. Type in the program execution command "RUN∗" (∗ represents the program number) and press
the Enter key.
Insert a space between "RUN" and the program number.
The selected program will be executed as soon as the execution command is entered.
7-8