Basic Operations; Names Of Parts - Vexta EMP400 Series Operating Manual

9.2

Basic operations

Operation specific to the operational unit will be described.
If this is the first time using the operational unit, please read and understand this section on basic
operations and learn the operations specific to the operational unit before using it.

9.2.1 Names of parts

Data display
In MON mode, data will be displayed depending
on the controller operation.
In EDIT and TEACH modes, data will be displayed
based on the operation.
When the value is negative, the empty space to
the left will display a minus sign.
Selects the operation mode.
In EDIT and TEACH modes, if you press this button
before saving data, data being set will be cleared.
Selects the digit to modify.
Selects the digit to modify.
9 Controlling with the operational unit
MON This illuminates when the MON mode is selected.
EDIT This illuminates when the EDIT mode is selected.
TEACH This illuminates when the TEACH mode is selected.
AX1 This illuminates when the first axis is selected.
AX2 This illuminates when the second axis is selected.
MON EDIT TEACH
AX1 AX2
Saves the data setting.
This switches between the first and second axes.
Also, changes the data being displayed.
This switches between the first and second axes.
Also, changes the data being displayed.
9-3