How To Execute A Program - Vexta EMP400 Series Operating Manual

7 7 7 7 7 Executing the program
7.1

How to execute a program

The program saved in the controller memory may be executed in one of the following three methods:
Executing via the host controller
You can select and execute a program via the host controller.
See section 7.2, "Program execution via the host controller."
Automatic program execution
The program you have written under program number 99 is automatically executed upon power
on or RESET command input.
See section 7.3, "Automatic program execution."
Program execution via command
The program may be executed by inputting an execution command to HyperTerminal.
See section 7.4, "Program execution via command."
7-2