How To Start Hyperterminal - Vexta EMP400 Series Operating Manual

6.3.2 How to start HyperTerminal

1. Switch off the power to the controller.
2. Connect the controller's CN2 with your computer using the optional FC04W5 modular cable
(purchased separately).
3. Start the computer.
4. Click on the "Start," "Program," "Accessories," "Communication" and "HyperTerminal" icons to
start Hyper Treminal.
A window appears with a slot, where a name can be typed in for the new connection.
6 Writing and editing a program
6-5