Table of Contents
Advertisement
8
Program command
V
Name
Valid mode
Syntax
Function
Request
8-48
Set operating speed
Direct input/program
V (1 | 2) [, |
] n
Parameter
(1 | 2)
Axis
n
Operating speed
Sets the operating speed.
During a continuous operation, setting with a command during an operation becomes valid
immediately, resulting in a multistep speed-change operation.
0>V1
0: V1 = 10000
0>V2
0: V2 = 20000
Data range
1 (operate axis 1), 2 (operate axis 2)
∗ If this parameter is omitted, axis 1 will be
operated.
10 to 200,000Hz
Default
10,000
- Quick Links:
- System Configuration
Hide quick links:
Advertisement
Table of Contents
