Digisol DG-GS4826S Management Manual page 1320

Layer 3 gigabit ethernet managed switch
Table of Contents

Advertisement

G
LOSSARY
ICMP
Internet Control Message Protocol is a network layer protocol that reports
errors in processing IP packets. ICMP is also used by routers to feed back
information about better routing choices.
IGMP
Internet Group Management Protocol. A protocol through which hosts can
register with their local router for multicast services. If there is more than
one multicast switch/router on a given subnetwork, one of the devices is
made the "querier" and assumes responsibility for keeping track of group
membership.
IGMP P
Proxies multicast group membership information onto the upstream
ROXY
interface based on IGMP messages monitored on downstream interfaces,
and forwards multicast traffic based on that information. There is no need
for multicast routing protocols in an simple tree that uses IGMP Proxy.
IGMP Q
On each subnetwork, one IGMP-capable device will act as the querier —
UERY
that is, the device that asks all hosts to report on the IP multicast groups
they wish to join or to which they already belong. The elected querier will
be the device with the lowest IP address in the subnetwork.
IGMP S
Listening to IGMP Query and IGMP Report packets transferred between IP
NOOPING
Multicast Routers and IP Multicast host groups to identify IP Multicast
group members.
I
-B
M
Management of the network from a station attached directly to the
N
AND
ANAGEMENT
network.
IP M
F
A process whereby this switch can pass multicast traffic along to
ULTICAST
ILTERING
participating hosts.
IP P
The Type of Service (ToS) octet in the IPv4 header includes three
RECEDENCE
precedence bits defining eight different priority levels ranging from highest
priority for network control packets to lowest priority for routine traffic. The
eight values are mapped one-to-one to the Class of Service categories by
default, but may be configured differently to suit the requirements for
specific network applications.
LACP
Link Aggregation Control Protocol. Allows ports to automatically negotiate
a trunked link with LACP-configured ports on another device.
L
2
Data Link layer in the ISO 7-Layer Data Communications Protocol. This is
AYER
related directly to the hardware interface for network devices and passes
on traffic based on MAC addresses.
– 1320 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg-gs4850s

Table of Contents