Table of Contents
Advertisement
Control commands
1
2
3
4
5
30
31
32
COMMAND 1 to 32
For association of control command execution keys (COMMANDs A to I), each execution condition has two
planes. Normally, use only "PLANE A", but if you want to operate different operations alternately at every time
execution conditions are met, turn "TOGGLE" to "ON" and associate PLANE A and PLANE B separately. You
can select which command will be executed at start-up of the MSD from "AUTO", "PLANE A", or "PLANE B". If
you select "AUTO", the opposite plane of the plane executed immediately before turning off the MSD will be
executed. "TOGGLE" of all execution conditions is set to "OFF" by default.
When PLANE B is executed, LEDs for control command execution keys on the front panel are illuminated
(PLANE A will be executed at the next press); when PLANE A is executed, the LEDs blink (PLANE B will be
executed at the next press).
[Association to COMMAND A]
Control command
1
2
3
@SAM,1,1 CR LF
4
@SAM,1,0 CR LF
5
30
31
32
COMMANDs 1 to 32
[Fig. 7.39] Example of toggle operation of control command execution key
Associating
commands
Execution order
[Figure 7.37] Associating control command
COMMAND A
PLANE A
PLANE B
1st
COMMAND 3 COMMAND 4
2nd
3rd
4th
5th
6th
7th
8th
9th
10th
[Fig. 7.38] Associating control command execution keys
COMMAND A
PLANE A
1st
Associating
COMMAND 3
commands
2nd
3rd
4th
5th
6th
7th
Execution
8th
order
9th
10th
Execution condition
COMMAND A
COMMAND B
1st
COMMAND 3
2nd
COMMAND 4
3rd
COMMAND 1
4th
5th
6th
7th
8th
9th
10th
Execution condition
COMMAND B
PLANE A
PLANE B
[Execution of COMMAND A]
PLANE B
COMMAND 4
Sending COMMAND 3 (Audio output mute of OUT1 ON)
Sending COMMAND 4 (Audio output mute of OUT1 OFF)
169
MSD-804FD User's Guide
COMMAND C
Turning on
Operating COMMAND A key
PLANE A is executed
LED of front and TALLY blinks
Operating COMMAND A key
PLANE B is executed
LED of front and TALLY are lighten
Advertisement
Table of Contents
