Table of Contents
Advertisement
7.3.5
Overscan [INPUT OVER SCAN]
･The enlargement rate: 100% to 115%
[Default values]:
105% for SDTV
100% for HDTV/VESA: On the full screen
The effective display areas of SDTV are narrowed slightly during edit. If they are displayed without any
change, areas without videos (usually black bars) are displayed on edges. To avoid this problem, input videos
are enlarged slightly, called Overscan.
HDTV and VESA are displayed on the full effective display area. (Some HDTV signals include areas which
display black bars on the edges depending on sources.)
1. To set the overscan using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
↓ SET key
[OUTPUT TIMING]
INPUT OVER SCAN
↓ SET key
[IN1 OVER SCAN]
105%
↓ ESC key: Returns to the previous screen
2. To set the overscan using commands:
@SOV: Set overscan
@GOV: Get overscan
Top
keys: Select "OUTPUT SETTING".
keys: Select "INPUT OVER SCAN".
keys: Select the desired overscan rate (100% to 115%).
keys: Select the desired input (IN1 to IN8).
59
MSD-804FD User's Guide
For each input port/input signal
Advertisement
Table of Contents
