Table of Contents
Advertisement
If connecting to HDBaseT output (RJ-45 connector), follow the following notes. If the transmission line has a
problem, video and audio may be interrupted.
Connectors for a long-distance transmission are the same as eight-core modular connector that is used in
Ethernet. However, since the transmission method is not the same, it cannot be connected to Ethernet.
To ensure the best performance, select the appropriate cable and connect it correctly.
1.
We recommend a Cat5e/Cat6 UTP/STP cable for the twisted pair cable.
2.
For pin assignments, apply T568A or T568B standards for straight through wiring.
3.
Keep the twisted pair cable as straight as you can. If you coil the cable, it is easily affected by noise.
4.
Do not place this product in an electrically noisy environment, since high-speed signal is transmitted
5.
If the distance between the transmitter and receiver is 100 m/328.08 feet or less, cables can be joined
using an RJ-45 plug coupler or wall outlet.
6.
For transmission longer than 164 ft. (50 m), Cat6 cable is recommended.
If the problem still cannot be solved, shorten the length of the twisted pair cable. Problems may be solved by
the action.
Note: HDBaseT output does not support DVI signals whose content is protected by HDCP. If you need to
extend DVI signal with HDCP, please use the IDK's HDC-RD100 as a receiver.
For HDMI I/O, please use the cable with HDMI Type A (male) connector. For cables longer than 16.4 ft. (5 m),
use our recommended cable, AWG24*.
*AWG(American Wire Gauge)
Recommended cables:
Flexible model Standard model
10 m ： HDSS-10
15 m ： HDSS-15
20 m ： HDSS-20
30 m ： -
40 m ： -
50 m ： -
Notes:
If you use a cable other than the recommended cable above, the extension distance may be shorten.
Those model number would be changed. Please contact us.
HDMI/HDMI24-10
HDMI/HDMI24-15
HDMI/HDMI24-20
HDMI/HDMI24-30
HDMI/HDMI24-40
HDMI/HDMI24-50
19
MSD-804FD User's Guide
Advertisement
Table of Contents
