Output Contrast [Output Contrast] - IDK msd-804fd User Manual

7.4.8

Output contrast [OUTPUT CONTRAST]

You can set Red, Green, and Blue separately.
･Contrast (Red): 0% to 200% [Default]: 100%
･Contrast (Green): 0% to 200% [Default]: 100%
･Contrast (Blue): 0% to 200% [Default]: 100%
If you reduce the set value, the amplitude decreases and if you increase the value, the amplitude
increases.
1. To set the output contrast using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
IMAGE EFFECT
↓ SET key
[IMAGE EFFECT]
OUTPUT CONTRAST
↓ SET key
[OUT1 CONT] LINK:ON
R:100 G:100 B:100
↓◄►keys
[OUT1 CONT] LINK:ON
R:100 G:100 B:100
↓◄►keys
[OUT1 CONT] LINK:OFF
R:100 G:100
↓◄►keys
[OUT1 CONT] LINK:OFF
R:100 G:100
↓◄►keys
↓ ESC key: Returns to the previous screen.
*1
If you set "LINK" to "ON", you can set only Red (R). Settings of Green (G) and Blue (B) are also changed
associated with the settings of the Red (R). For example, if you increase Red (R) +2, Green (G) and Blue
(B) are also increased (+2). If one of these three colors reaches the limiting value, it cannot be changed
any further.
*2
Only if you set "LINK" to "OFF", you can set the contrasts of Green and Blue.
2. To set the output contrast using commands:
@SOC: Set output contrast
@GOC: Get output contrast
Top
▲▼keys: Select "IMAGE EFFECT".
▲▼keys: Select "OUTPUT CONTRAST".
▲▼keys: Select "LINK" of R&G&B (OFF, ON).
▲▼keys: Set the contrast of Red for OUT1 (0% to 200%).
▲▼keys: Set the contrast of Green for OUT1 (0% to 200%).
B:100
▲▼keys: Set the contrast of Blue for OUT1 (0% to 200%).
B:100
For each output (common to OUTA and OUTB)
82
MSD-804FD User's Guide
*1
*2
*2