Table of Contents
Advertisement
1. To set the speaker configuration using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
EDID
↓ SET key
[EDID]
SPEAKER
↓ SET key
[IN1 SPEAKER]
MODE:AUTO
↓ ◄►keys
[IN1 SPEAKER]
MODE:AUTO
↓
[IN1 FL/FR]
ON
Repeat the same procedure for other speakers.
↓ SET key: Applies settings.
[SPEAKER]
NOW UPDATE...
↓
[EDID]
SPEAKER
* The cursor can be moved only if you select "MANUAL". The number of speakers is displayed on
the right side of the screen.
Note:
If you do not press the "SET" key, the speaker configuration is not changed. Make sure to press the "SET" key
after each change.
If you set the speaker configuration manually and press the "SET" key, the
number of speakers will be set automatically. If the number of speakers exceeds
the available value, the following message is displayed and the settings will not
be applied.
2. To set the speaker configuration using commands:
@SSP: Set speaker configuration
@GSP: Get speakers configuration
Top
▲▼keys: Select "EDID".
▲▼keys: Select "SPEAKER".
▲▼keys: Select the setting mode of IN1 (AUTO, MANUAL).
NUMBER:2
▲▼keys: Set the number of speakers of IN1 (1 to 8).
NUMBER:2
When it is changed, the speaker configuration will be set automatically
▲▼keys: Set "OFF" or "ON" for the front L/R of IN1.*
NUMBER:2
The message is displayed for one second and then previous screen is
displayed automatically.
132
MSD-804FD User's Guide
DATA INVALID
Advertisement
Table of Contents
