Table of Contents
Advertisement
7.10.1 RS-232C communication settings [PARAMETERS]
You can set up the RS-232C communication settings for each connector.
･Baud rate: 4800, 9600, 19200, 38400 [bps] [Default]: 9600 [bps]
･Data length: 8, 7 [bit] [Default]: 8 [bit]
･Parity: NONE, EVEN, ODD [Default]: NONE
･Stop bits: 1, 2[bit] [Default]: 1[bit]
1. To set the COM port using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
COM PORT
↓ SET key
[COM PORT]
PARAMETERS
↓ SET key
[CH1 PARAMETERS]
9600 8 NONE
↓
[CH2 PARAMETERS]
9600 8 NONE
↓
[OUT1B PARAMETERS]
9600 8 NONE
↓ SET key: Applies settings
[COM PARAMETERS]
NOW UPDATE...
↓
[COM PORT]
PARAMETERS
Note:
If you do not press the "SET" key, the communication setting is not changed. Make sure to press the "SET"
key.
*OUT1B to OUT4B are available only if HDBaseT output option is mounted.
2. To set the COM port using commands:
@SCT: Set COM port communication
@GCT: Get COM port communication
Top
keys: Select "COM PORT".
keys: Select "PARAMETERS".
↑ ESC key: Cancels the setting and returns to the previous screen.
keys: Set the communication of RS-232C CH1.
1
keys
keys: Set the communication of RS-232C CH2.
1
keys
keys: Set the communication of OUT1B.*
1
Displays the message for 1 second before automatically returning to
the previous screen.
135
MSD-804FD User's Guide
Advertisement
Table of Contents
