Table of Contents
Advertisement
Item
Cable maximum extension
distance
Functio
Scan converter
ns
Others
Externa
RS-232C
l control
LAN
External control
Others
Power supply voltage
Power consumption
Enclosure dimensions
Weight
Temperature
Humidity
Supplied items
*1
30 bit/ pixel (10 bit/ component) Deep Color is supported.
xvYCC, Lip Sync, 3D, ARC, and HEC are not supported. (Lip Sync: manually adjustable)
*2
Only HDBaseT does not support DVI signal protected by HDCP. Use HDC-RD100 for the receiver to transmit those DVI signal.
*3
RJ-45 (HDBaseT output connector) is only for extending video, audio, power for a receiver, control signal using a Cat5e/Cat6 twisted pair cable. IDK
receivers are required. Please do not connect LAN devices to this connector.
*4
Wiring is straight T568A or T568B. If exceeding 164.04 ft./50 m, it is recommended to use a Cat6 cable.
*5
Extended distance depends on the connected device. The data above is the maximum distance obtained when IDK's cable (AWG24) was used and signals,
1080p 60Hz 24 bit/ pixel (8 bit/ component), were input and output. If you use other cables or for other combinations of I/O devices, video signals may be
unstable or may not be output even if it is within the distance range indicated above.
*6
Since some LCD monitors do not stabilize during operation, please check the operation before using or ask IDK for advices.
*7
Seamless switching with a black frame
*8
This function automatically recovers from a snow noise problem occurring when video signals having HDCP are displayed. It is mainly for the time of start-up
and does not work if the problem has already occurred in signals input to the MSD or due to a low-grade transmission line.
*9
Digital input: 32.8 ft. to 98.4 ft./10 to 30 m (*5)
Digital output:
HDMI/DVI: 32.8 ft. to 164 ft./10 m to 50 m (*5), HDBaseT: 328 ft./100 m (*6)
Aspect ratio control, Picture adjustment (brightness, contrast, display position, display size, and
so on), Seamless switching (*7)
Volume adjustment (settable for input/output separately), Lip sync, Video/audio (non-interlock)
switching, Cross point memory (8 memories), Preset memory (8 memories + start-up memory),
Last memory, Anti-Snow (*8), Connection reset (*9)
External control commands (32 commands), Key lock
2 ports, D-sub 9 pin connector, male
1 port, RJ-45 connector, 10Base-T / 100Base-TX (Auto Negotiation), Auto MDI / MDI-X
Command output from RS-232C, LAN, or HDBaseT output to external devices
PJLink (class1), Power control of sink devices using CEC (*10)
AC ～ 100 V - 240 V ±10%, 50 Hz / 60 Hz ±3 Hz
0.8 A
16.93(W) x 3.46(H) x 13.78(D)"/430(W) x 88(H) x 350(D) mm
(EIA rack 2U, not including projections)
Regular model: 11.9 lbs./ 5.4 kg
HDBaseT2 and T4: 12.3 lbs./ 5.6 kg
Operating temperature: 32°F to 104 °F /0°C to + 40°C
Storage temperature: -4°F to 176°F/-20°C to + 80°C
Operating/Storage humidity: 20% to 90% (Non condensing)
RS-232C cable (1.8 m/ 5.9 feet), power cable (1.8 m/ 5.9 feet), brackets for mounting rack,
Cable clamps×12
222
MSD-804FD User's Guide
Description
Advertisement
Table of Contents
