Horizontal Display Period [H Display] - IDK msd-804fd User Manual

7.6.3

Horizontal display period [H DISPLAY]

･Horizontal display period: 64 to 2900 (Equal or less than [The total number of horizontal dots - 64])
[Default]: Depends on input signals
Horizontal
synchronizing signal
The settable range depends on setting of "7.6.1 The total number of horizontal dots [H TOTAL DOTS]".
The set value is [Total number of horizontal dots >Horizontal displaying period].
1. To set the horizontal display period using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
INPUT TIMING
↓ SET key
[INPUT TIMING]
H DISPLAY
↓ SET key
[IN1 H DISPLAY]
1024DOT
↓ ESC key: Returns to the previous screen
Note:
You can set the horizontal display period only if there is an input signal. If no signal
is input, you cannot set the period, and the message shown right is displayed.
2. To set the horizontal display period using commands:
@SHD: Set horizontal display period
@GHD: Get horizontal display period
Video signals
Horizontal display period = The number of dots displaying video
[Fig. 7.21] Horizontal display period
Top
keys: Select "INPUT TIMING".
keys: Select "H DISPLAY".
▲▼keys: Set the horizontal display period.
◄►keys: Select the desired input (IN1 to IN8).
Total horizontal dots
91
MSD-804FD User's Guide
For each input port/input signal
[IN1 H DISPLAY]
NOT AVAILABLE NOW